|
|
Grinder
in a box!
All
the wheels in the platen and idler arm are meant to be mounted on a
1/2 inch bolt. If you use something different, you may have
to adjust the hole size. A good source for wheels is www.usaknifemaker.com
You
can get smaller wheels, idler wheels, contact wheels, larger wheels
as well as belts there.
The
grinder in a box is designed to use a motor with a 56c frame.
If
you have a motor with a different frame, it may or may not work.
Wayne
Coe is now offering motors and VFD's to work with 3 phase motors for
variable speed. More information can be found at his website
at www.waynecoeartistblacksmith.com
The prices listed for the wheels are the prices when I last edited this
page. Those prices may change without warning. I only sell the grinder in a box kit. All wheels are from from www.usaknifemaker.com. The price I have for the motor is from a local supplier. Check with Wayne Coe for a better price. The misc hardware is an estimate from what I had to buy from my local hardware store.
| Single
speed GIB with standard platen |
| 1 |
Grinder in a box kit ($250 plus $10.50 shipping) |
$260.50 |
| 1 |
Motor - single speed (3450 rpm)
56c frame |
$225.00 |
| 1 |
Drive
wheel (4" with 5/8" bore) |
$56.18 |
| 2 |
Contact
wheel @ $46.64 apiece
2" aluminum, 2" rubber coated, or 3 inch rubber coated would also work |
$93.28 |
| 1 |
Idler/tensioner
wheel |
$61.48 |
|
Misc hardware (bolts, washers,
1 1/2 sq bar, etc...) |
$25.00 |
|
Total |
$721.44 |
| Single speed GIB with multi platen | | 1 | Grinder in a box kit ($250 plus $10.50 shipping) | $260.50 | | 1 | Motor - single speed (3450 rpm)
56c frame | $225.00 | | 1 | Drive
wheel (4" with 5/8" bore) | $56.18 | | 1 | Contact
wheel
2" aluminum, 2" rubber coated, or 3 inch rubber coated would also work | $46.64 | | 1 | Idler/tensioner
wheel | $61.48 | | 1 | 8"
contact wheel | $104.35 | | Misc hardware (bolts, washers,
1 1/2 sq bar, etc...) | $25.00 | | Total | $779.15 |
Parts
Tools
Breakdown
Assembly
FAQ
|
